ISO9001:2008 approved Flotation Separator

flotation cell is formed by U-through solid, hollow shaft inflation, suspension rotor and new type impeller flotation cell

This type of flotation cell is formed by U-through solid, hollow shaft inflation, suspension rotor and new type impeller

The cone impeller lean backwards, the blending quantity is big and the pressure head is small, the advantages are: simple structure and low energy consumption

Inside the impeller, there is air distributor, which distributes air into most parts of impeller evenly

When flotation cell works, slurry is inhaled from the bottom of the trough to the space between impellers

The low pressure air send by fan is sent to this area through the air distributor in the hollow shaft

After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole trough

When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir

Another part of ore slurry flows to lower part of impeller for the re-miss with air

The remained slurry flows to the next trough until becomes residue

KYF inflatable mechanical mix type flotation cell

Model		KYF-1	KYF-2	KYF-3	KYF-4	KYF-8	KYF-16	KYF-24	KYF-38
Chute dimen-sions	Length/mm	1000	1300	1600	1800	2200	2800	3100	3600
	Width/mm	1000	1300	1600	1800	2200	2800	3100	3600
	Height/mm	1100	1250	1400	1500	1950	2400	2900	3400
Single effective weight/kg		826.31	1419	1885	2206	3600	5900	7500	10300
Effective storage/m³		1	2	3	4	8	16	24	38
Capacity(calculated by slurry volume)(m³/min)		0.2-1	0.4-2	0.6-3	1.2-4	38	416	424	1038

 flotation cell, flotation cell, flotation machine

ISO9001:2008 approved Flotation Separator